Bio Mass Based Carbon Di-Oxide Production Plant
Bio Mass Based Carbon Di-Oxide Production Plant
Bio Mass Based Carbon Di-Oxide Production Plant is wide in demand in different sectors for the production plant. We assemble the plant integrating well developed technology, so that its working life, production and strength can be maximized. These production plants are of vital importance to power generation plants.
Features :
- Low cost of operation
- Less maintenance required
- Compact to design and layout
- Simplified operation
- No contamination of lubricating oil
Specification :
Ashirwad Carbonics (India) Private Limited, Ghaziabad (India) |
Utility Requirement for Different Capacity CO2 Production Plant |
Plant Capacity | Recommended Area | Power | Make Up Water | Liquid CO2 Storage Capacity | Fuel Oil |
Length | Width | Height |
In Kg/Hr. | Ft. | Mtr. | Ft. | Mtr. | In Ft. | Mtr. | KW | GPM | L/MIN | In Metric Ton | GPH | L/HR |
100 | 50 | 15.2 | 28 | 8.5 | 39 | 100 | 50 | 15.2 | 28 | 8.5 | 39 | 100 |
250 | 57 | 17.4 | 39 | 11.9 | 40 | 250 | 57 | 17.4 | 39 | 11.9 | 40 | 250 |
500 | 66 | 19.8 | 46 | 14 | 41 | 500 | 66 | 19.8 | 46 | 14 | 41 | 500 |
650 | 65 | 19.8 | 55 | 13.8 | 41 | 650 | 65 | 19.8 | 55 | 13.8 | 41 | 650 |
1000 | 72 | 21.9 | 55 | 16.8 | 48 | 1000 | 72 | 21.9 | 55 | 16.8 | 48 | 1000 |
Larger Capacities are available on request as per customer requirement. |
Production Process :
- Fuel is burned under specific conditions controlled by PLC control panel
- Post the scrubbing of water /soda in DCC tower/SO2 removal tower, the flue gas is absorbed in the monoethanolamine based solution present in absorber tower and then into the stripper tower which is subsequently heated by the combustion process to release the raw CO2 gas
- The carbon dioxide is fed into the PTK, a purification train that comprises two KmNO4 towers
- After passing through activated carbon filter, it is fed into two stage vertical or horizontal compressor and finally into the high pressure pre-cooler and then into the dryer
- From there, it moves towards the liquefaction system in which screw compressor and R 404A is used as a refrigerant
- Finally pure and liquefied carbon dioxide produced is fed into a bulk storage tank
Components used in the plant :
- CO2 generator
- Amine regenerator
- SO2 removal tower
- Absorber tower
- Stripper tower
- CO2 compressor
- Liquefaction unit
- CO2 dryer
- PLC control panel